Home > NZo > Pleated PP Micron filters

Pleated PP Micron Filters

By GSE

These are high efficiency pleated polypropylene microporous filter cartridges. These are made from superfine polypropylene fibrous membranes, non-woven fabrics and an inside and outside support layer. The casing, central rod and end caps are shaped by heat welding technique, without the use of any adhesives. This provides for a pure, contamination free and leak proof product. This product is used successfully in harmaceutical, chemical, electronics, liquor distilleries, dairy, mineral water and water treatment industries.

Advantages

Use of Virgin Grade PP Material
International Standard Dimensions
Sterilized at 120 deg C under 5 cycles

Specifications

Parameter	Value
Outer Diameter	2.7 inches (69mm)
Inner Diameter	28mm
Length (inches)	10 / 20 / 30 / 40
Filter Media	PP
Type	DOE / Code 7 Configurations
Cage/Core/End Cap	PP
Gasket	Silicone
Removal Rating	0.2 / 0.45 / 1 / 5 Micron
Max Operating Temp	80 Deg C
Max Operating Pressure	4.0 Bar
Max Operating DP	2.0 Bar